china casting foundry

Sand Casting

Sand Casting Services — Leesh Holdings Foundry Group

One-stop sand casting, CNC machining and inspection under one foundry group, based in Shenyang, China's heavy industry base.

Request a Quote

Leesh Holdings — Your Partner for Sand Casting Services

Leesh Holdings provides complete Sand Casting Services for buyers who need dependable cast components in gray iron, ductile iron, carbon steel, alloy steel and stainless steel. From our foundry group, each project runs from drawing review and pattern tooling through molding, pouring, finishing, machining and export packing, so you work with one responsible supplier from the first sample to container loading.

The service covers prototypes, pilot batches and volume programs. Castings range from a few hundred grams to tens of tons, and customers in construction, machinery, automotive and energy use our parts in pumps, gearboxes, engine components, crusher parts and structural equipment.

What Is Included in Our Sand Casting Services

Six in-house capabilities cover the entire route from drawing to delivery:

Pattern & Tooling

Patterns and core boxes built with correct shrinkage and machining allowances for your drawing.

Molding & Core Making

Green sand, furan resin sand and coated sand lines matched to your batch size and part structure.

Melting & Pouring

Electric furnace melting with per-heat chemistry control for iron and steel grades.

Finishing & Heat Treatment

Shakeout, riser removal, grinding and stress-relief annealing when the drawing requires it.

CNC Machining

Milling, boring, drilling and tapping carried out in our own machining workshops.

Inspection & Export Packing

Dimension, hardness and internal quality checks, then seaworthy packing for safe shipping.

Sand Casting Services – Technical Capabilities

Key parameters of our Sand Casting Services are summarized below:

ItemSpecification
MaterialsGray iron, ductile iron, carbon steel, alloy steel and stainless steel; grades to ASTM, SAE, AISI, ACI, DIN, EN, ISO and GB
Casting Weight0.1–3,000 kg for iron castings; 50–25,000 kg for steel castings
Molding ProcessesGreen sand, furan resin sand, water glass sand, coated sand (hot-box & shell molding)
Casting ProcessResin sand, green sand, water glass quartz sand, alkali phenolic resin sand, coated resin sand (hot-box & shell molding)
Dimensional ToleranceCT8–CT12 (per ISO 8062)
Surface RoughnessRa 6.3–25 μm as cast
MachiningCNC milling, boring, drilling and tapping to drawing tolerances
Industries ServedConstruction, machinery, automotive, energy and general equipment

Common Cast Iron & Cast Steel Material Grades

The two tables below list the grades we pour most frequently. They are common references only — other materials and special grades are available according to your drawings and requirements.

Cast Iron Material Grades

Material CategoryCommon Grades
Gray IronASTM A48 Cl.20, Cl.25, Cl.30, Cl.35, Cl.40; GG20, GG25, GG30, GG35; GB HT200, HT250, HT300
Ductile IronASTM A536 60-40-18, 60-42-10, 70-50-05; GGG40, GGG50, GGG60; GB QT400-15, QT450-10, QT500-7

Note: the grades above are the most commonly used cast iron grades and are not limited to these — other grades and special specifications are available per customer requirements.

Cast Steel Material Grades

Material CategoryCommon Grades
Carbon SteelWCB, WCC, LCB, LCC, 1020, 1025, 1040, 1.0619
Alloy Steel8620, 8630, 4130, 4140, 4320
Stainless SteelASTM A351 CF8, CF8M, CF3, CF3M, 4A, 6A; AS2074

Note: the grades above are the most commonly used cast steel grades and are not limited to these — other grades and special specifications are available per customer requirements.

Foundry Inside — Leesh Holdings Workshops

Quality starts on the shop floor. The photos below give you a look inside the workshops where your castings are molded, poured, machined and checked before shipment.

Automatic molding line in Leesh Holdings foundry

Automatic Molding Line

Melting and pouring area of the foundry

Melting & Pouring

CNC machining workshop of Leesh Holdings

Machining Workshop

Quality inspection area of Leesh Holdings foundry

Quality Inspection

Pattern and core making in Leesh Holdings foundry

Pattern & Core Making

Heat treatment of castings in Leesh Holdings foundry

Heat Treatment

Shot blasting of castings in Leesh Holdings foundry

Shot Blasting

Packing and shipping of castings at Leesh Holdings

Packing & Shipping

The Process Flow Behind Our Sand Casting Services

Every order follows the workflow illustrated below — from part drawing and mould design to machining, final inspection and loading:

Leesh Holdings sand casting process flow from part drawing to shipping

Sand Casting Vs Investment Casting

Both processes are available inside Leesh Holdings, and the right choice depends on your part. Investment casting builds a ceramic shell around a wax pattern to deliver fine detail and a smooth as-cast surface, while sand casting uses lower-cost sand molds and handles much larger and heavier parts. The table below compares the two so you can match the process to your project.

FeatureSand CastingInvestment Casting
Molding MethodExpendable sand molds with reusable patternsWax patterns covered by a ceramic shell (lost wax)
Typical MaterialsGray iron, ductile iron, carbon steel, alloy steel, stainless steelMainly steel and special alloys
As-Cast SurfaceRa 6.3–25 μmSmoother surface with finer detail
Dimensional ToleranceCT8–CT12 (per ISO 8062)Tighter, roughly CT4–CT6
Part Size & WeightFrom 0.1 kg up to tens of tonsBest for small to medium parts
Best ForLarge, heavy parts and flexible batch sizesSmall, intricate parts with a fine finish

If you are unsure which process suits your part, our engineers can review your drawing and recommend the most cost-effective route within our sand casting services.

Why Choose Leesh Holdings for Sand Casting Services?

  • ✓ Two automatic casting lines plus flexible molding for prototypes and bulk orders
  • ✓ Iron and steel foundries in one group — a single supplier for mixed materials
  • ✓ In-house machining and inspection shorten lead times and protect quality
  • ✓ Engineer review of every drawing before tooling, with feedback to reduce cost
  • ✓ Seaworthy packing and export documentation for worldwide customers

Sand Casting Services FAQs

What do you need to prepare a quotation?

A 2D drawing (PDF) and, if available, a 3D model (STEP/IGES), together with the material grade, estimated weight, order quantity and machining requirements. An NDA can be signed before the technical review.

Which materials and standards do you support?

Gray iron, ductile iron, carbon steel, alloy steel and stainless steel, supplied to ASTM, SAE, AISI, ACI, DIN, EN, ISO and GB standards or to your own specification.

What tolerances can you reach?

As-cast dimensions follow CT8–CT12 per ISO 8062, while machined surfaces and bores are produced to the tolerances stated on your drawing.

Can you supply fully machined castings?

Yes. CNC milling, boring, drilling and tapping are done in our own workshops, so parts can arrive ready for your assembly line.

What are the MOQ and lead times?

MOQ is flexible and samples are welcome. Tooling normally takes a few weeks, while the production lead time of our sand casting services depends on quantity, material and machining scope.

Request a Quote for Sand Casting Services

Send your drawings to david.lee@leesh.cn and our engineers will reply with price, lead time and process suggestions.

Contact Us
Scroll to Top